Lebus International Engineers

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

Spooling Systems for Wire Rope

The Lebus spooling system is designed for any hoisting and winching application that uses multiple layers of wire rope on a drum.

 

Address
Lerchenberg 10,
Finning 86923,
Germany
Phone
Fax Number
Share

The Lebus spooling system is designed for any hoisting and winching application that uses multiple layers of wire rope on a drum. The geometry of Lebus grooving, coupled with Lebus know-how, ensures that your wire rope spools smoothly onto and off the rope drum under total control – a dependable performance every time.

Every Lebus drum is custom engineered. It is designed and produced specifically to meet the application for which it is used. The groove pattern is engineered to suit the rope’s length, diameter and construction type.

ROPE SPOOLING SYSTEM FOR ANY HOISTING AND WINCHING APPLICATION

The Lebus system keeps the spooled rope in a uniformed pattern, evenly distributing the load between the individual layers of rope. This prevents lower layers being crushed or pinched by upper layers. Independent field tests have proved over the years that the Lebus system can extend rope life by more than 500%.

CONTINUOUSLY GROOVED DRUMS

With the Lebus system, the continuous groove in the drum is parallel to the flange except for two crossover points on each revolution where the groove moves across the drum half a pitch to give a full pitch of movement for each revolution. With Lebus grooving it is possible to calculate exactly the direction of the forces that the rope imposes on the drum because the spooling is totally controlled. This is not possible with any other spooling system.

The Lebus system ensures that spooling is kept under control so your wire rope lasts much longer - often more than five times longer.
Lebus split sleeves can be bolted or welded onto a smooth drum.
New sleeves retrofitted onto old winch drums.
Lebus spooling system - based on the unique geometry of the drum grooving.
With Lebus drums you can calculate the exact forces exerted by the rope on the drum. This is because the spooling is totally controlled.

SPLIT SLEEVES FOR WIRE ROPE

It is not always necessary to purchase a new drum. Lebus can supply its grooving system on outer sleeves that can be bolted or welded onto your old drum, no matter how old or worn it is.

Lebus split sleeves can also be an economic option for new drums. If in future a different type or size of wire rope is used, the sleeve can be taken off and replaced with a new sleeve engineered for the new application. The Lebus system is so flexible that it can be individually adapted to any existing or new hoist system, even in extreme operating conditions and high loadings. The Lebus system can be installed either during the manufacturing process or later onsite.

WINCH REFURBISHMENT CASE STUDY

Winches working in aggressive maritime environments can become worn out after a number of years’ service. Replacing them can be time-consuming and expensive, particularly when the lost revenue from the time out of service is considered. However, it is not always necessary to replace winches. Refurbishment is often a viable option.

Saipem Indonesia contacted Lebus wanting to replace six worn out anchor winches on its Semac 1 pipe laying barge. Lebus offered a refurbishment option instead of replacement, costing much less and taking just one week to complete. This solution saved Saipem hundreds of thousands of dollars in reduced downtime.

Instead of taking out the winches, Lebus welded on Lebus split sleeves, false flanges (to make the length of the drum match the new grooving) and compensation plates. Lebus also adjusted the level winders, which is a mechanical rope guide system and changed the gear ratio to match the number of pitches on the Lebus groove. This was done by just changing four sprockets.

White Papers

  • In the Groove - Lebus International Engineers Bulletin Issue 9

    Issue 9 of the Lebus International Engineers bulletin includes articles on the world's largest pipe laying vessel, Lebus's new factory hall, The Investigator oceanographic research vessel, and geothermal drilling, plus an interview with Tim Seidenather, managing director for quality and production at Lebus.

Press Releases

  • Lebus Offers Cost-Saving Refurbishment Updates

    As a global market-leader for multi-layer wire rope spooling, Lebus International Engineers offers its customers clever refurbishment solutions, which combine substantial cost saving with improved operations. Lebus can design, manufacture and install split-sleeves to give new life to o

  • High-Tech Solutions from Bavaria for Port and Sea Giants

    For three years Lebus has been supplying the Lebus grooving on the winches of the floating, dock and container cranes made by ZMPC, the Chinese world-market leader for onshore and offshore cranes. Those cranes are real giants made of steel, more than 100m high, able to lift and move up to 7,000t.

  • Lebus' New Assembly Hall in Full Operation

    Opened last autumn in the peak of a worldwide economic crisis, the second production hall of Lebus International Engineers is now in full operation. The new establishment enables Lebus to enlarge its capacity by one third, which is urgently needed as the increased demand from Asia, mai

  • Lebus International Engineers Releases News Bulletin

    Lebus International Engineers has released its latest news bulletin to the Offshore-Technology website. The seventh bulletin includes the Det Norske Veritas' (DNV) revised Standard for Certification No.2.22 Lifting Appliances, information on Lebus partners, employee news, as well as information o

  • New Assembly Hall Expands Output Capacity

    Lebus International Engineers GmbH has opened a second production hall at its premises in Finning, near Munich, Germany. The 900m² assembly hall increases production capacity by more than 30%. Fitted with a pair of 10t capacity overhead cranes, the new hall is being used for assem

  • Lebus Calls for Better Solution to Offshore Lifting Crisis

    The offshore lifting sector has been thrown into turmoil by new guidance from certification and standards agency DNV that effectively limits the use of deepwater cranes to just 58% of their rated capacity. Following a winch drum failure last year, where a flange broke, DNV revised its

Address
Lebus International Engineers
Lerchenberg 10
Finning 86923
Germany

Email address